Bitunova in Europe

Possibilities:


The company disposes of a modern production plant for the production of all kinds of bituminous emulsions at European quality levels.
The metering system of the additives is automated (BRAN+LUEBBE, ProMinent);
The dispergator’s type of colloid mill (DENIMO Tech A/S) Denmark;
Production capacity – 11 tons per year;
Storage capacity of bituminous emulsion – 360 tons;
Storage capacity of bituminous – 550 tons;
Operating conditions – full time at a temperature of about >5 °С.


The company has a measuring laboratory at its disposal, which is equipped with modern measuring devices. The laboratory is accredited in Ukrainian State Standard System (certificate number: PT-0100/05 issued on April 29th, 2005)


The machine for thin-layer covering in the MULTIMACTM technology was manufactured by the German company Schäfer. (Germany)
The metering system of the additives is totally automated by computer control.
Double metering control of adhesion promoters.
Possible breadths of thin-layer covering: 1,5 – 3,8 meters;
Production capacity – 3,500 square meters;
Operating conditions - full time at a temperature of about >16 °С.


The machine for surface coverings is produced by Schäfer (Germany)
The metering system of the additives is automated and controlled electronically;
Possible breadths of thin-layer covering: 0,25 – 3,0 meters;
Production capacity – 10,000 square meters;
Operating conditions – full time at a temperature of about 20 °С.


Schäfer Blow-Patcher machine (Germany)
Automatic dosing system with electronic control;
Performance - 100m ² road surface per shift at a depth of potholes to 5 cm;
Working mode - the daytime with the air temperature > 15 ° C.


Machine for large-scale rehabilitation of bituminous bound road pavements (Hot REMIX та Hot REMIX+) Wirtgen (Germany).
Allows reconstruction of asphalt concrete pavement at the depth of 6 cm without the addition of new materials and at the depth of 10 cm with the addition of a new asphalt mix in one pass;
Width reconstruction – 2,5, 3,5, 4,5 m.;
Performance (with a depth reconstruction of 6 cm) - 2000m ² per shift.
Working mode - 24 hours at an air temperature >5° С.




Machine for building roads using existing old pavement - cold recycling technology (Cold RECYCLING ) Wirtgen (Germany).
Allows reconstruction of pavement at the depth of 20 cm in one pass;
Width reconstruction – 2,8 - 4,2 m;
Performance (with a depth reconstruction of 20 cm) - 2000m ² per shift.
Working mode - 24 hours at an air temperature >5° С.


The machine for cold milling is produced by Wirtgen (Germany)
The milling machine removes surface layers to a depth of 25 cm and up to 5 cm of cement-concrete layers.
The milling machine works at a breadth of 2 meters.
Production capacity – 3,500 square meters;
Operating conditions – full time at a temperature of about 2 °С.


The cistern for the transportation of bituminous emulsions is produced by SCHWARZMUELLER (Germany).
Bituminous emulsions can be transported more than 2,000 km.
The cistern is made of noncorrosive steel.
Operating conditions – full time at a temperature of about -5 °С.


The truck for transportation of rock materials is produced by SCHWARZMUELLER (Germany) Loading capacity - 35 tons.
Operating conditions – full time.


See below our further constructing equipment for our repair work on Ukrainian roads.